6061-T6 has good deep processing properties such as milling, cutting, and engraving, and is suitable for mold manufacturing and the production of machined parts. It has excellent surface oxidation and coloring properties. Currently it is suitable for the oxidation engraving market, mostly used in stairs, screens and other markets.
Functional characteristics of 6061 aluminum plate: The main alloy elements of 6061 aluminum plate include magnesium and silicon. It has high quality and medium strength, good corrosion resistance, weldability, and good oxidation effect. It is widely used in various applications that require a certain strength and high antimicrobial corrosion resistance. Industrial structural parts.
Chemical composition of 6061 aluminum plate:
Silicon Si: {{0}}.40-0.8 Iron Fe: 0.7 Copper Cu: 0.15-0.4{{10}} Manganese Mn: 0.15 Magnesium Mg: 0.8-1.2 Chromium Cr: {{20}}.04-0.35 Zinc Zn: 0.25 Titanium Ti: 0.15 Aluminum Al: Balance Others: Single: 0.05 Total: 0.15
It can neutralize the bad effects of iron; sometimes a small amount of copper or zinc is added to improve the strength of the alloy without significantly reducing its corrosion resistance; there is also a small amount of copper in the conductive material to offset the titanium and iron Adverse effects on electrical conductivity; zirconium or titanium can refine grains and control recrystallization structure; in order to improve machinability, lead and bismuth can be added. Mg2Si is solid dissolved in aluminum, giving the alloy artificial age hardening properties. The main alloying elements in 6061 aluminum alloy are magnesium and silicon. It has medium strength, good corrosion resistance, weldability, and good oxidation effect.
Alcoa 6061 has excellent processing performance, good corrosion resistance, high toughness, no deformation after processing, easy color film application, and excellent oxidation effect.
It is an Al-Mg-Si alloy with medium strength, good plasticity and excellent corrosion resistance. In particular, it has no tendency to stress corrosion cracking, has excellent weldability, corrosion resistance and cold workability. It is a promising alloy with a wide range of uses. It can be anodized and colored, or painted with enamel, and is suitable for use as building decoration materials. It contains a small amount of Cu, so its strength is higher than that of 6063, but its quenching sensitivity is also higher than that of 6063. It cannot be air quenched after extrusion, and requires re-solution treatment and quenching aging to obtain higher strength.
